APHRODITE HQS
BY TSUME
ASSEMBLY INSTRUCTIONS
PLEASE DO NOT ASSEMBLE YOUR COLLECTIBLE STATUE IMMEDIATELY AFTER RECEIVING IT
Allow the resin to warm to room temperature for at least 24 hours to avoid any risk
of breakage.

PREFERABLY WEAR LATEX GLOVES TO HANDLE YOUR STATUE.
You can build your statue alone.
Floor 1
Floor 2
Please wait at least
24 hours
after receiving your statue to proceed with its assembly
1. Place the base (1).
将底座(1)放置好
2. Insert the pillar (12) into the base.
将支柱(12)插入底座
3. Insert the pillar (2) into the base.
将支柱(2)插入底座
4. Insert the effect (25) into base.
将特效件(25)插入底座
5. Insert the roses (3) into the base.
将玫瑰(3)插入底座
6. Insert the roses (10) into the base.
将玫瑰(10)插入底座
7. Insert the roses (18) into the base.
将玫瑰(18)插入底座
8. Insert the roses (15) into the base.
将玫瑰(15)插入底座
9. Insert the roses (4) into the base.
将玫瑰(4)插入底座
10. Insert the effet (24) into the base.
将特效件(24)插入底座
11. Insert the effet (27) into the base.
将特效件(27)插入底座
12. Insert the roses (7) into the base.
将玫瑰(7)插入底座
13. Insert the roses (6) into the base.
将玫瑰(6)插入底座
14. Insert the roses (20) on the 10 designated spots (see details below).
将玫瑰(20)插入预留的10个位置(详见下文)
15. Insert the body (26) into the base.
将主体(26)安装到底座上
16. Insert the cape (23) into the body.
将披风(23)安装到主体上
⚠️ Insert gently, taking care around the two pillar.
请轻轻安装,注意避开两个支柱
17. Insert the left shoulder pad (9) on the body.
将左肩甲(9)安装到主体上
18. Insert the right shoulder pad (19) on the body.
将右肩甲(19)安装到主体上
19. Insert the head (22) on the body.
将头部(22)安装到主体上
20. Insert the left arm (17). For the alternative left arm, go to step 20*.
安装左臂(17)。如需安装附加手臂,请参见步骤20*
20*. Insert the alternative arm (13).
安装附加手臂(13)
21. Insert the right arm (17). For the alternative right arm, go to step 21*.
安装右臂(14)。如需安装附加手臂,请参见步骤21*
⚠️ Fit gently to avoid scratching the cape.
请轻轻嵌入,以避免刮伤披风
21*. Insert the alternative right arm (8).
安装附加手臂(8)
⚠️ Fit gently to avoid scratching the cape.
请轻轻嵌入,以避免刮伤披风
22. Insert the rose (11) under the two fingers. For the white or black rose, see steps 22* and 22**.
将玫瑰(11)放入两指之间。如需安装白玫瑰或黑玫瑰,请参见步骤22*和22**
22*. Insert the white rose (16) under the fingers.
将白玫瑰(16)放入两指之间
22**. Insert the black rose (5) under the fingers.
将黑玫瑰(5)放入两指之间
23. Insert the logo (21) on the base.
将铭牌(21)安装到底座上